Home > Products > Accessories
Accessories
rcexl ignition use Mini tachometerv1.0
Author: DateTime:2009-8-29 17:59:18 Views: Tags:
Rcexl ignition use Mini tachometer
 
1. Use  PIC16f628a microcontrollers
2. Do not need batteries,Power from the  ignition
3. Standard FUTABA plug(Black-Negative Red-Positive and White-Signal)
4. Using high-brightness LED digital tube.
5. Input voltage range:3.5V-8.4V
6. Current consumption 25mA-60mA
7. Mini tachometer indicates up to 30000 rpm
8. Actual RPM= Display Digital *10
9. Body Size: 41mm L x 17mm W x 12mm H
10.Window Size: 30mm L x 15mm H
11.Weight:8.5g   (0.3OZ)
Instructions:
1.The Y wiring tandem between in the HALL sensor and the ignition.
2.The tachometer plug the other end with Y wire.
3.Connected to ignition power supply and can be displayed
Note:
That connecting plugs do Reinforcement. To prevent vibration.
The hall sensor & tachometer wire Leave from the Ignition high-voltage wire,
And receiver wires over 30cm
Connection tachometer is not recommended after the use of flight,
Best to remove the Y wire to restore the original sensor connection
If ignition  have an additional tachometer pinout.
You must be connected to dedicated tachometer signal wire.

Note:
Can not guarantee that other types of ignition can use the tachometer And guarantee accuracy
 
instructions to download:20098291757639172.pdf
Pre Info:SPARK PLUG TYPE
Next Info:1/4-32 Spark plug & cap Assembly
TotalComments
Catalogs
CopyRight:rcexl.com 金华阿西尔电子有限公司
JinHua RC Electrinic CO.,LTD